01
Inside & outside
Inner and outer roller brushes work on both walls of the mold.
V-TAI / VT-CE-CM2
VT-CE-CM2 removable-bottom cake ring washer
Residue inside removable-bottom chiffon cake rings can resist rinsing and demand repeated hand scrubbing. The VT-CE-CM2 uses installed brush assemblies and cold water, with a quick cycle of about 15 seconds for two compatible molds.
- molds per hour
- 300–400
- mold diameter
- 6–14″
- total power
- 0.5 kW
- quick wash cycle
- ≈15 s
Indicative throughput. Actual output depends on soil, mold size, cycle settings and loading time.
01 / ENGINEERED AROUND THE MOLD
Brushes loosen residue. Cold water carries it away.
Focus on the residue clinging to chiffon cake ring walls. Brushes loosen it; cold water carries it away. Test your actual dirty molds to establish brush contact, cycle time and a practical loading routine.
01 / 0302
Top, base & grooves
Plate brushes and an adjustable groove brush reach the edges and recessed details.
03
Brush. Rinse. Repeat.
Cold-water spray carries loosened residue away. No water-heating system required.
02 / ONE MACHINE, MORE SIZES
Made for the molds you use every day.
From cake rings to fixed-base and removable-base molds, one VT-CE-CM2 serves your daily production.
- Cake rings
- Fixed-base molds
- Removable-base molds
Confirm material, coating, height and profile with our team. Sample testing is recommended for delicate coatings and unusual shapes.
| Metric | Value | Unit | Basis, formula & conditions |
|---|---|---|---|
| Mold diameter / right station | 6–10 | in | Documented specification Confirm material, coating, height and profile with our team. Sample testing is recommended for delicate coatings and unusual shapes. Product sheet · p. 2Reviewed |
| Mold diameter / left station | 8–14 | in | Documented specification Confirm material, coating, height and profile with our team. Sample testing is recommended for delicate coatings and unusual shapes. Product sheet · p. 2Reviewed |
| Metric | Value | Unit | Basis, formula & conditions |
|---|---|---|---|
| Model | VT-CE-CM2 | — | Documented specificationProduct sheet · p. 2Reviewed |
| Length | 1200 | mm | Documented specificationProduct sheet · p. 2Reviewed |
| Width | 740 | mm | Documented specificationProduct sheet · p. 2Reviewed |
| Height | 1215 | mm | Documented specificationProduct sheet · p. 2Reviewed |
| Mold diameter / right station | 6–10 | in | Documented specification Confirm material, coating, height and profile with our team. Sample testing is recommended for delicate coatings and unusual shapes. Product sheet · p. 2Reviewed |
| Mold diameter / left station | 8–14 | in | Documented specification Confirm material, coating, height and profile with our team. Sample testing is recommended for delicate coatings and unusual shapes. Product sheet · p. 2Reviewed |
| Rated throughput | 300–400 | molds/h | Reference value Indicative throughput. Actual output depends on soil, mold size, cycle settings and loading time. Product sheet · p. 2Reviewed |
| Quick cycle | ≈15 | s | Reference value Designer and product information; handling excluded. Product sheet · p. 2Reviewed |
| Molds per cycle | 2 | molds/cycle | Documented specification Designer and product information; handling excluded. Product sheet · p. 2Reviewed |
| Total electrical load | 0.5 | kW | Documented specification Electrical power rating, not measured energy consumption. Product sheet · p. 2Reviewed |
| Motors | 0.2 | kW/motor | Documented specification Electrical power rating, not measured energy consumption. Product sheet · p. 2Reviewed |
| Motor count | 2 | motors | Documented specificationProduct sheet · p. 2Reviewed |
| Voltage | 380 | V | Documented specification Quick cycle: approximately 15 seconds for two molds, excluding handling. Confirm 50/60 Hz configuration before ordering. The supplied manual references compressed air; our team will confirm the requirement for the delivered machine. Product sheet · p. 2Reviewed |
| Frequency options | 50 / 60 | Hz | Configuration option 50 or 60 Hz configuration must be confirmed before ordering; not a continuous adjustment range. Product sheet · p. 2Reviewed |
| Power phases | 3 | phases | Documented specification Quick cycle: approximately 15 seconds for two molds, excluding handling. Confirm 50/60 Hz configuration before ordering. The supplied manual references compressed air; our team will confirm the requirement for the delivered machine. Product sheet · p. 2Reviewed |
| Water inlet size | 3/4 | nominal inches | Documented specification Nominal connection size; do not interpret it as a measured bore diameter. Product sheet · p. 2Reviewed |
| Drain diameter | 38 | mm | Documented specificationProduct sheet · p. 2Reviewed |
| Construction | SUS304 | — | Documented specificationProduct sheet · p. 2Reviewed |
Based on V-TAI product information and the supplied product sheet. Final configuration and sample suitability should be confirmed with V-TAI.
V-TAI · VT-CE-CM2 Download product sheet · PDF · Chinese · 2 pages